Understanding LED Statuses

Last updated About 1 month ago

Gateway Hub LEDs

Power LED

LED state	Meaning
Green	Hub is connected to power and is active or in standby.

GNSS LED (GPS status)

LED state	Meaning
Off	Hub is in standby; GNSS and CELL LEDs are inactive.
Red	GNSS is active but has not acquired any satellites.
Blinking red	Hub is acquiring satellites but has not achieved a location fix.
Green	GNSS has acquired satellites and a location fix.

Cell LED (network connectivity)

LED state	Meaning
Off	Hub is in standby; no active network connection (GNSS LED also off).
Red	No SIM card detected.
Blinking red	Hub is connecting to a mobile network.
Blinking green	Connected to the mobile network but not yet to the Route One Go cloud.
Green	Fully connected to both the mobile network and the Route One Go cloud.

Camera LEDs

Power LED (green)

LED state	Meaning
On	Camera is powered and active.
Off	Camera is in standby or powered off.

Event LED (red)

LED state	Meaning
Blinking	A visual event alert is active — the camera has detected and recorded an event.